Document Trim Size (final size after being cut)
Horizontal Vertical
3.37“ x 2.13" 2.13" x 3.37
85.5mm x 54mm 54mm x 85.5mm
1010 x 638pixels 638 x 1010pixels
Full Bleed Size (starting document size)
Horizontal Vertical
3.44" x 2.20" 2.20" x 3.44"
88.5mm x 57mm 57mm x 88.5mm
1045 x 673pixels 673 x 1045pixels
* Finished artwork should use the full bleed dimensions for best results.
* Please be sure to keep all text within the safe margin.
We support a variety of file formats for uploading designs.
Vector Graphic Files is preferrd- vector-based images can be scaled by any amount without degrading quality. Usually supplied in PDF, AI, EPS or CDR formats.
Before submitting your artwork, please check that:
1. The preferred format is vector graphic files. Usually suppies in PDF, AI,EPS OR CDR formats.
2. Your artwork is the correct size. Artwork to be 1-up on a single page document.
3. Bleed is set to exact 1.5mm
4. The document colour mode set to CMYK
5. All Rich Black are set to C = 40%, M = 0%, Y = 0%, K = 100%.
6. All fonts are outlined (converted to curves) or embedded.
7. All links are embedded.
8. All lines in your artwork are at least 0.3pt and all text should be at least 8pt using a non narrow style font.
9. All borders in your artwork are at least 5mm wide.
10. All images in your artwork are 300dpi when placed at 100%.
Please Note:
1. If two sides are selected, your artwork should contain a design for both sides.
2. Also if possible, please provide crop marks around the artwork.
3. All white area in your design would be blank and can be see through on the frosted or clear plastic cards if you didn't require to add an white blocker under it before print.
4. We print in CMYK and not RGB. Supplying artwork in RGB will effect the final colour.
5. If business cards are ordered with any additonal option, a PDF proof will always be sent to the customer. This must be approved before the job can be printed. If not approved in time, the order may be delayed.
1. How to indicate the opaque area on a frosted card?
If you want a colour to be opaqueness, we can add the white blocker under the colour to increase it opaqueness at extra cost. Adding white blocker is an opaque layer behind the printing to make it pop off the cards and add opaqueness.
2. How to indicate the area to be seen through without printing?
For the frosted/clear plastic cards, all white area in your artworks would be seen through without printing. So just make the area you want to be frosted/clear without colour printing in white in your artworks. Then we will leave it blank on the final cards
3.Can I get the Clear Frosted Business Cards double sided?
Yes, but double sided printing is available only for specific artwork, please email us the artwork at contact@boostprint.com.au then we would check any possible problem. The cost would be also different.
4. Can Clear Frosted Business Cards be written on?
Unfortunately not, even a permanent marker cannot be used to write on such card stock.
5.Can I have white text on the frosted plastic cards?
Yes, but don't like other CMYK colous, the white text can't be printed in the CMYK printing process or we have no white colour. To have the white colour on the translucent or transparent plastic cards, we need add an white blocker/ink on the white area before print. The 'white blocker area' can also increase opacity of the colour printed on top to give it more vibrancy against the frosted plastic. As an additional option, the white blocker does not include in the price of our standard plastic frosted or clear business cards. It will be added as per your design at extra cost.
6. Can the corners be done a right- angle?
Unfortunately, the standard corners of all our plastic cards including the frosted business cards are rounded corners.
7. Do you give a quality guarantee on your work?
7daysprint stands behind the quality of its products and services. If you are not satisfied with your purchase from us, simply contact Customer Service by email within 15 days from the date you receive it (or the date it was scheduled to arrive), and we will reprint part or all of your order. In some cases, we may refund the full price of the product(s) in question, excluding shipping, postage. 7daysprint is committed to customer satisfaction, and we do everything possible to ensure proper cutting, accurate color reproduction, and excellent printing quality. However, certain circumstances are beyond our control and are not covered by this guarantee. Please check the Term and Conditions page to note that we cannot be responsible for.
8. How do I know if my Order has been Dispatched yet?
It is very easy to find your order. To view the details and status of your order, you may log in anytime after placing your order. Listed below are four different status codes for our workflow.
-In prepress. We check file availability. If you did not meet artwork requirement, we ask you to revise file and send us by email.
--Ready to print. If your artwork is fine to print, our prepress department is preparing your job for print.
--Finish printing.
--Shipped.
When your order is dispatched, it will show as ‘shipped’ which is just after the dispatch process. The serial number of any post bag or con note is displayed in the details section. And you can require us to send the tracking number via email.
10. Can you print the colour as same as that in my design?
At Boostprint we take pride in matching colours to our clients CMYK proofs. however the following terms and conditions apply.
1. Print colour may vary from print run to print run and/or from job to job or from front to back.
2. Boostprint will reproduce colour from digital files as closely as
possible, but may not exactly match colour and density due to limitations in the proofing and printing process, as well as neighbouring image ink requirements.
3. A reasonable variation in colour between original materials, proofs and the completed order, will be considered acceptable print quality.
4. It is important to note the technical limitations of screen, digital and offset printing processes.
5. Where CMYK designs are used, a higher degree of colour variation is normal. While every effort is made to reproduce the colours on chemical and professional digital proofs Boostprint Pty Ltd shall not be liable to reprint or otherwise compensate the client for a commercially acceptable variation in colour when comparing the proof to the final product, the disc to paper parts, or throughout a printed batch of products.
6. Acceptable variations may be up to 10% of selected CMYK colour values, Colour Matching and Proofing Process.
At Boostprint you should only expect high quality business cards that are cost-effective. Still looking for answers?
Please read our Frequently Asked Questions page for more commonly asked questions.
